Discover FT8, FT4 and weak-signal digital radio with software designed specifically for the CB and 11-metre DX community.
For many years, DX operators have enjoyed the challenge of making long-distance contacts on 27 MHz. From the early days of AM and SSB to today's modern radios and computer technology, our hobby has continued to develop.
One of the more interesting recent developments is WSJT-CB, a modified version of the well-known WSJT-X software, designed especially for 11-metre operators.
Rather than requiring amateur radio callsigns, WSJT-CB recognises many of the familiar callsign formats used by international DX groups, including Delta Tango, Alfa Tango and other 11-metre organisations.
For anyone interested in propagation, weak signals and finding out which countries are coming through, it offers another fascinating side to the radio hobby.
What Is WSJT-CB?
WSJT-CB is an open-source digital radio application developed by 1AT106 / 1XZ001 Vash, based on the original WSJT-X software created by Joe Taylor, K1JT, and the WSJT development team.
The software has been adapted to make digital communication on 27 MHz more practical for CB and 11-metre enthusiasts.
Unlike conventional voice communication, digital modes transmit specially encoded information that a computer can decode.
One of the biggest advantages is the ability to detect signals that may be too weak for the human ear to understand.
Instead of hearing a distant station speaking through noise and interference, the computer may successfully decode its callsign, location and signal report.
This can reveal remarkable long-distance propagation openings that might otherwise go unnoticed.
What Makes WSJT-CB Different?
Standard WSJT-X was developed primarily for amateur radio operators.
WSJT-CB introduces several changes specifically intended for the 11-metre community.
CB and DX Callsign Support
The software accepts many of the familiar international DX callsigns used by radio groups.
For example:
- 1AT106
- 26AT101
- 3DT114
- 29DT163
- 2DT1836
These examples follow the documented callsign formats supported by the software. Some longer formats are restricted, particularly four-digit unit numbers with multi-digit division prefixes.
International Division Recognition
WSJT-CB incorporates a country lookup system based on traditional numerical 11-metre DX divisions.
This allows decoded callsigns to be associated with their countries, making incoming signals easier to identify.
Dedicated 11-Metre Frequencies
The software includes an 11-metre band selection and several preset frequencies associated with digital activity.
Improved Contact Handling
Changes have been made to the automatic sequencing system to improve exchanges involving longer CB-style callsigns.
This helps the software manage signal reports, confirmations and completed contacts.
Digital Signal Reporting
WSJT-CB can work with spotting and reporting facilities, helping operators share information about which signals have been received.
Which Digital Modes Does It Support?
WSJT-CB concentrates on four important weak-signal modes.
FT8 – The Popular Weak-Signal Mode
FT8 is probably the best-known modern digital radio mode.
It uses short, structured messages transmitted in 15-second intervals.
A typical FT8 contact can exchange callsigns, signal reports and acknowledgements without either operator speaking into a microphone.
FT8 is particularly useful when signals are weak, fading or affected by noise.
For DX enthusiasts, it offers a different way to observe propagation conditions and receive distant stations.
FT4 – Faster Digital Contacts
FT4 uses a similar principle to FT8 but has a shorter transmission cycle of approximately 7.5 seconds.
This makes contacts quicker, although FT4 generally requires stronger signals than FT8.
FST4 – Extremely Weak Signals
FST4 was developed for situations where reliable communication is difficult because of very weak signals.
It offers different transmission periods and can be particularly interesting for experimenting with marginal radio paths.
Q65 – Advanced Weak-Signal Decoding
Q65 is another digital mode designed for challenging signal conditions.
It is used in specialist weak-signal work and offers further opportunities for learning about digital radio techniques.
These modes are intended primarily for structured digital exchanges and signal experiments rather than ordinary conversations.
WSJT-CB Frequencies
The software includes the following 27 MHz frequency presets.
27.265 MHz – FT8
This is the project's principal FT8 reference frequency and corresponds to EU/CEPT CB channel 26.
27.045 MHz – Alternative FT8 and Other Modes
The software also includes 27.045 MHz as an alternative FT8 frequency and a default for FT4, FST4 and Q65.
Important: These are software presets, not a declaration that every frequency or digital transmission mode is legal in every country.
In particular, 27.045 MHz is not an authorised UK CB channel centre.
The internationally familiar 27.555 MHz USB DX calling frequency should not be confused with the WSJT-CB FT8 preset. It is outside the UK's licence-exempt CB channels.
What Equipment Do You Need?
For receiving and decoding signals, you will need:
- A computer running suitable WSJT-CB software.
- A receiver or SDR capable of receiving 27 MHz signals.
- A suitable 11-metre antenna.
- A way of passing the received audio into the computer.
- An accurate computer clock.
A conventional receiver with an audio connection can be used, while some SDR receivers allow audio to be routed directly through the computer.
If you already use a computer-connected HF or 11-metre receiver, you may have much of the required equipment.
No microphone or transmitter is necessary for receive-only monitoring.
Getting Started – Receive-Only Guide
Step 1 – Download the software
Visit the official WSJT-CB website and select the appropriate download.
https://www.xzgroup.net/wsjt-cb.html
The project provides a Windows installer and Linux packages through its release repository. Availability of packages varies by operating system.
Step 2 – Install WSJT-CB
Follow the installation instructions for your computer.
The software has a similar layout to the original WSJT-X application, with decoding information, frequency settings, an audio waterfall and configuration options.
Step 3 – Configure your receiver
Choose your audio input device and set the software to receive audio from your radio or SDR.
Check that the incoming signal level is sensible and not overloaded.
Step 4 – Set your computer clock
Digital modes depend on accurate timing.
An incorrectly set computer clock is one of the most common reasons why otherwise strong FT8 signals fail to decode.
Synchronise your clock using a reliable internet time service.
Step 5 – Select FT8
Choose FT8 from the available modes and monitor the software's 27.265 MHz reference frequency.
Remember that the correct tuning and sideband settings depend on the receiver and software configuration.
Step 6 – Watch the waterfall
The waterfall display shows signals appearing across the received audio spectrum.
Digital signals often appear as narrow traces rather than voice signals.
Step 7 – Read the decoded messages
When a signal is successfully decoded, the software can display information such as the station callsign, message, signal report and other contact details.
For receive-only monitoring, leave transmission disabled.
Understanding Signal Reports
FT8 and other digital modes use numerical signal reports.
You might see values such as:
- +05 dB
- -08 dB
- -15 dB
- -22 dB
These are signal-to-noise reports calculated by the decoder.
A negative reading does not necessarily mean that a signal cannot be decoded.
Indeed, part of the attraction of weak-signal digital modes is their ability to recover information from signals buried in noise.
These figures are not the same as traditional S-meter readings or ordinary voice signal reports.
Discovering Propagation with WSJT-CB
One of the most useful aspects of digital radio is how it can help operators understand propagation.
The 27 MHz band is strongly affected by changing ionospheric conditions.
Solar activity, the time of day, season and geographical location all influence which countries can be received.
During a strong opening, stations thousands of miles away may be decoded.
At other times the band can appear almost completely closed.
By monitoring digital activity over time, operators can begin to recognise patterns.
For example:
- Which European countries are regularly appearing?
- Are stations from North or South America being received?
- Does the band open to Africa at particular times?
- Are there short-distance Sporadic-E openings?
- Are unusual long-distance paths appearing around sunrise or sunset?
Digital signal reports offer another source of information alongside conventional voice DX contacts.
They do not replace listening on SSB, but they can complement it.
Digital Spotting and Reporting
WSJT-CB includes support for reporting decoded station activity.
PSK Reporter is one of the best-known services associated with digital radio reception.
It allows operators to examine reception reports and explore where signals have been heard.
Whether a particular WSJT-CB callsign or report appears correctly depends on the reporting service and its handling of CB-style identifiers.
Not every amateur-radio reporting service provides full support for 11-metre DX callsigns.
Nevertheless, digital spotting has considerable potential for building a better picture of propagation activity.
For Delta Tango members, information from receiving stations could eventually help create a community-based digital DX activity map.
Can You Use WSJT-CB in the United Kingdom?
This is an important question, especially because software developed internationally may provide frequencies or operating methods that are not authorised in the UK.
Ofcom allows licence-exempt CB radio operation using compliant equipment on specified UK and EU/CEPT channels.
FM, AM and SSB operation are permitted subject to the relevant technical requirements.
However, the fact that a frequency appears in WSJT-CB does not automatically authorise FT8, FT4 or another computer-generated digital transmission.
Nor does permission to use SSB automatically establish that every digital emission carried over SSB is permitted.
The precise compatibility of an intended digital transmission with UK CB equipment requirements, channel rules and emission conditions needs to be established before transmitting.
For UK enthusiasts, receive-only decoding provides a straightforward way to investigate WSJT-CB without transmitting.
27.265 MHz is an authorised EU/CEPT CB channel centre, but that alone does not establish permission for every possible digital mode.
27.045 MHz is not one of the authorised UK CB channel centres.
27.555 MHz, frequently used for international SSB DX activity, is also outside the UK licence-exempt CB channels.
Operators should consult Ofcom's current CB regulations and relevant interface requirements before transmitting.
Official Ofcom information:
https://www.ofcom.org.uk/spectrum/radio-equipment/citizens-band-radio
WSJT-CB Version 1.4.1 – Scarlet
At the time of writing, November 2026, the latest verified release is WSJT-CB 1.4.1, known as Scarlet.
This release addresses problems involving WSPR and radio-control settings where older software configuration paths were still being used.
It also improves migration of existing settings while maintaining separate radio profiles.
The project continues to be developed openly, and users can follow its progress through GitHub.
Official Downloads and Useful Links
WSJT-CB Official Website
Project information, downloads and introduction.
https://www.xzgroup.net/wsjt-cb.html
WSJT-CB User Guide
Detailed instructions and explanations of the software's special features.
https://www.xzgroup.net/wsjtcb_guide.html
WSJT-CB GitHub Releases
Latest installers, release notes and software updates.
https://github.com/vash909/WSJT-CB/releases
WSJT-CB Source Code
Open-source development and technical information.
https://github.com/vash909/WSJT-CB
PSK Reporter
Online digital reception reports and propagation information.
WSJT-CB Community
Telegram discussion group for users and developers.
What Could WSJT-CB Mean for Delta Tango Members?
For decades, Delta Tango operators have enjoyed the challenge of long-distance radio communication.
Many of us remember spending hours listening to distant stations, waiting for a brief opening, or trying to complete a difficult contact through fading and interference.
That remains the heart of our hobby.
WSJT-CB introduces another way to explore the same radio conditions.
It offers an opportunity to monitor weak signals, learn about digital decoding, compare propagation with conventional SSB and experiment with modern receiving technology.
For technically minded members, there are opportunities to explore software-defined radio, digital signal processing and signal reporting.
For everyone else, it may simply be fascinating to see a callsign from another country appear on the screen when the band sounds completely dead.
Digital radio will never replace the enjoyment of a proper conversation over the air, and it isn't intended to.
It is simply another interesting part of the hobby worth investigating.
Have You Tried It?
We would particularly like to hear from Delta Tango members who have experimented with WSJT-CB or other 11-metre digital receiving systems.
Which countries have you decoded?
Have you noticed unusual propagation openings?
How do digital reception results compare with the stations you hear using ordinary SSB?
Your experiences could help other members get started and contribute to a better understanding of conditions on 27 MHz.
DELTA TANGO International DX Group
Bringing radio enthusiasts together around the world.
It's good to talk!
https://www.deltatangodxgroup.com
The software features, frequencies and latest release have been checked against the developer's documentation, and the regulatory section against Ofcom's published guidance.
